Celebrating 34 years providing high quality products and advice.
Our Local Time Is 1:38:39 AM.
Call us at 818-786-0600. We are here to help!
Need a New Laboratory Water System? We have many to choose from. We can save you thousands on Complete Systems and replacement filters for most brands.
Short filter life on Barnstead E-Pure Lab Water Systems
Date : 7/27/2018
From :
Jorge
Question
Hey Amy We have a Barnstead E-Pure system We set it up with a brand new set of filters D0385 D0803 and D05027 after 20 days the resistivity readings were 5 to 6 megohm/cm when we used it and got up to 16 megohm/cm again for few minutes and go down again We decided to change new filters again and It was find for another 15 days and again it started doing the same At this point I dont think they are the filters and also the resistivity meter we bought a brand new one a month ago Could you please help up to figure out what is going on Thank you so much
Answer
If it went to 16-18 megohm when new then your filters are exhausting from poor feed quality. The system needs to be pretreated with either Reverse Osmosis, Distillation or Deionization to run economically.
If the resistivity goes up as you draw water off, that tells us the system is not recirculating. You could have a bad pump or return check valve.
If it starts high and drops low while drawing off water, it is the filters being used up and in you case it would have to be from poor feed water quality.
If you call us we would be happy to talk you through your problem.
This high capacity four housing lab water system is designed to provide up to 3 l.p.m. of ultrapure water exceeding ASTM and CAP Type I, II or III specifications.
Barnstead MicroPure Laboratory Water Purification System - Provides Type I Ultrapure Water.
Systems come with the filters. Does not require a permanent feed source. Portable. Just pour tap or treated water into the internal reservoir to produce ultrapure water.
Code F, 2.5 inch X 10 inch. Coconut shell carbon block with 10 micron outer wrap. Special Prep 1, for Chlorine removal with low extractable applications - 1/pk
Filter Housing
IWT 3C0600002 Style High Capacity Filter - Cartridge Universal II
This High Capacity Mixed Bed Deionization Filter is used for the reduction of dissolved minerals. with Color Indicator - Comparable to IWT and US FILTER 3C0600002 and HC200 or HC-200
Great for Lab Water Pretreatment
or Great Drinking Water
Images are representative of the products. Images may or may not be of the actual product. If it is important e-mail us for an actual image if available.
* Flat Rate UPS shipping when able to ship via UPS and is in the USA excluding Hawaii and Alaska. Larger Items may not be able to ship via UPS, in that case freight charges will be quoted seperately. International shipping will be quoted after the order is placed. You will have the opportunity to cancel before we finalize your order.